Vidyaranyapura, Bengaluru, Karnataka
GST No. 29AADCN6136C1ZL
Motion and Controls
Offering you a complete choice of products which include nexen rotary indexers, nexen's roller pinion gear system (rpg), compomac torque limiter, proportion-air mechanical pressure regulators, compomac torque limiters and nexen guide rail brake.Nexen Rotary Indexers
-
-
-
- +7
Approx. Rs 44,000 / PieceGet Latest Price
Product BrochureProduct Details:| Center Distance | 120 mm |
| Material | Stainless Steel |
| Temp Range | -5-40DegreeC |
| Finish | Bare Steel, and Black Oxide |
| Input Bolt Circle | 75mm |
| Input Bolt Hole Size | M6 |
| Input Shaft Dia | 14mm |
Nexen's innovative Roller Pinion technology, the patented Rotary Indexer Systems come complete with a precision-grade bearing and drive mechanism.
Nexen's Roller Pinion Gear System (RPG)
Approx. Rs 1,50,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel |
| Usage/Application | Industrial |
| Max rpm | 7300 |
| Input Bolt Hole Size | M4 *7.0 mm |
| Bore Size | 9mm |
| Design | Enclosed |
| Number Of Teeth | 20 |
| Gear Ratio | 50 |
Nexen's Roller Pinion Gear System (RPG) includes a patented pinion consisting of bearing-supported rollers and a proprietary tooth profile. Potential configurations include gears and gear segments with either external or internal teeth, which can be configured to meet the application. Gears pre-installed on heavy-duty bearings are also available.
COMPOMAC Torque Limiter
-
-
-
- +5
Approx. Rs 20,000 / PieceGet Latest Price
Product BrochureProduct Details:| Diameter(mm) | 40mm |
| Brand | COMPOMAC |
| Bore Size | 1.125 in |
| Max Rpm | 1650 |
| Hose Length | 8.25 in |
| Drive Arrangement | Pilot Mount |
| Cable Length | 6.5 ft |
| Bore Style | Straight |
| Backlash | 0.35 Degree |
| Country-of-Origin | USA |
| Temperature Range | 32 - 150 DegreeF |
A torque limiter protects mechanical equipment, or its work, from damage by mechanical overload. A torque limiter may limit the torque by slipping a friction plate clutch or disconnect the load entirely. The action of a torque limiter is useful to limit any damage to the machine or product due to mechanical failures or product jams in the machine. Torque limiters are typically installed on the output side of gear reducers to protect the gear set. See more at Design World Motion Control Tips Protecting Against Mechanical Overload Damage.
Proportion-Air Mechanical Pressure Regulators
Approx. Rs 45,000 / PieceGet Latest Price
Product BrochureProduct Details:| Disc Diameter | 100mm |
| Inlet Pressure | 100 PSI |
| Machine Type | Lathe Machine |
| Material | Stainless Steel |
| Media | Air |
| Packaging Type | Box |
| Brand | Proportion-Air |
mechanical pressure regulator options include those that control an application’s pressure downstream (pressure reducing) and those that are regulating upstream pressure (back pressure).
Compomac Torque Limiters
-
-
-
- +1
Approx. Rs 38,000 / PieceGet Latest Price
Product BrochureProduct Details:| Diameter(mm) | 10mm |
| Material | Stainless Steel |
| Size | 1/2 inch |
| Type | Gear Coupling |
| Brand | compomac |
A torque limiter protects mechanical equipment, or its work, from damage by mechanical overload. A torque limiter may limit the torque by slipping a friction plate clutch or disconnect the load entirely. The action of a torque limiter is useful to limit any damage to the machine or product due to mechanical failures or product jams in the machine. Torque limiters are typically installed on the output side of gear reducers to protect the gear set. See more at Design World Motion Control Tips Protecting Against Mechanical Overload Damage.
Nexen Guide Rail Brake
-
-
-
- +6
Approx. Rs 23,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel |
| Weight | 0.41 kg - 3.48 kg |
| Backlash at Full Brake Force (minimum) | up to 0.10 mm [0.004 in] - up to 0.20 mm [0.008 in] |
| Release Pressure (minimum) | 3.6 to 5.5 bar [52 to 80 psi] |
| Starting Engagement Time | 0.049 sec - 0.080 sec |
| Width | 15 mm - 45 mm |
| Holding Force (minimum) | 500 N [112 lbs] - 2600 N [585 lbs] |
A rail brake is a mechanical device that inhibits motion by absorbing energy from a moving system.
This brake can provide limited non-cyclic dynamic braking including E-stops.
The unique design uses multiple redundant air/spring chambers to apply force on the rail through dual wedge and roller mechanisms, providing low backlash, accurate positioning, and high reliability.
Additional Information:
Goizper Pneumatic Brakes And Clutches
Approx. Rs 1,50,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Disc Diameter | 100mm |
| Machine Type | Lathe Machine |
| Material | Cast Iron |
| Packaging Type | Box |
| Torque Range | varies with model |
| Country of Origin | Made in India |
Goizper’s standard pneumatic clutch-brake combinations and accessories, include:
- Pneumatic clutches, brakes, clutch-brake combinations
- Pneumatic servo brakes
- Pneumatic safety brakes
Mach III Custom servo brakes
-
-
-
- +4
Approx. Rs 15,000 / PieceGet Latest Price
Product Details:| Power | 10 W |
| Number Of Poles | 6 |
| Shape | round |
| Finish | polised |
| Country of Origin | Made in India |
When designing a motion control solution, servo brakes are components that often require special care to ensure success. Shaft connection or housing requirements can limit a standard servo brake’s effective operation or prohibit its installation
Nexen Rods Locks
-
-
-
- +4
Approx. Rs 30,000 / PieceGet Latest Price
Product BrochureProduct Details:| Features | Spring Engaged,Very Low Backlash,IP67 Rated,No Rod Displacement On Engagement,Compact,NexSafe |
| Rod Requirements | HRC60 Or Hard Chrome Plated Minimum Of 20 Microns,h8 Tolerance,Roughness 1.6 Microns |
| Static b10/b10d Cycle Life | 1,000,000/2,000,000 |
| Temperature Range | 0.5 - 60 DegreeC Continuous,Up To 100 DegreeC Intermittent |
| Port Size | 0.125 BSPT |
| Rod Size | 12 mm |
Rod Locks are spring-engaged, so they operate even in power-off situations to promote safety for operators and machinery. It has been designed to hold loads safely in position in a situation where the compressed air supply fails.
The rod locking feature is a mechanical function provided by a cartridge through which the piston rod passes and is mounted transversally in the rod lock unit of the cylinder.
Additional Information:
Goizper Pneumatic Brakes And C...
Approx. Rs 2,20,000 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Disc Diameter | As Per Drawing |
| Machine Type | Automated Systems |
| Material | Cast Iron |
| Packaging Type | Box |
| Usage/Application | Printing, Steel |
GOIZPER specialises in designing, manufacturing and marketing brakes, clutches and clutch brakes for various sectors: motor industry, iron and steel, packaging, marine, recycling
Additional Information:
Montalvo Tension And Torque controllers
-
-
-
- +1
Approx. Rs 55,000 / PieceGet Latest Price
Product BrochureProduct Details:| Voltage | 24V DC |
| Country of Origin | Made in India |
Tension is the pull or strain put on a web of material that tends to stretch it in the machine direction
Compression Load Cell
-
-
-
- +5
Approx. Rs 50,000 / PieceGet Latest Price
Product BrochureProduct Details:| Operating Temperature | 70 Degree C |
| Breaking Force | 300% |
| Material of Construction | High Nickle Alloy Steel |
| Enclosure protection class | IP 67 |
| Material | stainless steel |
| Overload Rating | 300% |
A load cell is a force transducer. It converts a force such as tension, compression, pressure, or torque into an electrical signal that can be measured and standardized. As the force applied to the load cell increases, the electrical signal changes proportionally.
The most common types of load cell used are strain gauges, pneumatic, and hydraulic, pneumatic.
Web Tension Controls
Approx. Rs 21,999 / PieceGet Latest Price
Product BrochureProduct Details:| Power | 100 or 240 VAC +-10% 50 to 60 Hz |
| Max. Power Consumption | 5W |
| Indicators Supported | Analog or Digital |
| Enclosure | Surface mount |
| Load Cell Supply | + 5 VDC / +-2.5 VDC |
| Brakes and Clutches Supported | Pneumatic and Electric |
| Classification | IP54 |
Tension control is the process of maintaining a predetermined or set amount of stress or strain on a given material between two points to maintain its desired properties (such as form, appearance, etc) and quality. This process often takes place in specific control zones: unwind/payout, process (nip), and rewind/take up, with each having unique tension control requirements.
So tension control is the process of ensuring your material gets from point A to point B in a uniform and consistent manner without any loss to material quality. Under this basic definition, most applications can already get their material processed from point A to B, but perhaps it is very manual or is slower than it could be.
Web Tension Guides
-
-
-
- +5
Approx. Rs 48,000 / PieceGet Latest Price
Product BrochureProduct Details:| Stroke Length | 350 mm |
| Usage/Application | Industrial Application |
| Controller Size | 4.3" |
| Diameter of Roller | 4" |
| Input Supply | 220 V |
| Phase | 2 Phase |
| Material | Mild Steel and Aluminium |
| Motor | 3 Phase & Single Phase |
| Power | 230 V |
| Pressure | 15 kg |
| Technique | Web Guide System |
Web guiding systems are necessary to properly align web material being transported through roll to roll converting machines.
Without web guiding systems and principles a number of factors such as process variations in tension and speed, material property variations in regard to quality, improperly maintained machines, changes in traction and so on, can affect the proper alignment of material.
Web tension Guide devices are used in aligning the flexible material roll-to-roll converting machines.
Nexen Roller Pinion Gears
Approx. Rs 1,20,000 / PieceGet Latest Price
Product BrochureProduct Details:| Max RPm | 7300 |
| Gear Ratio | 50 |
| Input Bolt Hole Size | M4 * 7.0 mm |
| Design | Enclosed |
| Bore Size | 9 mm |
Nexen's Roller Pinion Gear System (RPG) is based on an innovative pinion consisting of bearing-supported rollers and a unique tooth profile. Options, including gears, gear segments, and geared bearings, can be configured to meet the required specification.
Mach III custom clutch brakes
-
-
-
- +5
Approx. Rs 12,000 / PieceGet Latest Price
Product Details:| Disc Diameter | 100mm |
| Machine Type | Lathe Machine |
| Material | Cast Iron |
| Packaging Type | Box |
| Country of Origin | Made in India |
Extreme operating conditions, difficult installation spaces and other nonstandard motion system requirements often make custom-designed components essential. For connect and disconnect, as well as stopping and holding applications, clutch-brake combination units provide an all-in-one, convenient solution
Nexen Pneumatic Torque Limiters
Approx. Rs 35,000 / PieceGet Latest Price
Product BrochureProduct Details:| Brand | Compomac |
| Bore Style | Straight |
| Max RPM | 1650 |
| Drive Arrangement | Pilot Mount |
| Country- | USA |
| Hose Length | 8.25in |
Pneumatic Torque Limiters protect equipment by immediately disengaging the machine shaft when excessive torque or a machine jam occurs
Mach III Custom Torque Limiter
-
-
-
- +7
Approx. Rs 9,000 / PieceGet Latest Price
Product Details:| Type | Gear Coupling |
| Diameter(mm) | 10mm |
| Material | Stainless Steel |
| Size | 1/2 inch |
| Country of Origin | Made in India |
Torque limiters are essential in heavy-duty, high-performance machinery to keep down-line components safe from overloads.
Nexen Servomotor Brakes
Approx. Rs 1,40,000 / PieceGet Latest Price
Product Details:| Dimensions | (20-30)-(40-50) |
| Torque | 200-1200 |
| Weight | 10,000-30,000 |
| Speed | Excess of 300m (980ft) |
| Vibration | Less |
- his Unit Has Krytox LVP288 Grease In The Bearings For Clean Room Applications
- Includes Quick Exhaust Valve For Improved Engagement Response
Mach III Combination Clutch-Br...
Approx. Rs 32,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Disc Diameter | 100mm |
| Machine Type | Packaging Machinery |
| Material | Cast Iron |
| Packaging Type | Box |
Mach III combination clutch-brakes provide both clutch and brake functions in one simple to install unit. When the clutch portion of the unit is engaged, power is transmitted from a source such as a continuously rotating motor to a machine component such as a shaft
Additional Information:
Nexen Friction Clutch
-
-
-
- +1
Approx. Rs 25,000 / UnitGet Latest Price
Product BrochureProduct Details:| Bore Size | 2.500 - 6.000 in |
| Max Rpm | 800 |
| Port Size | 0.750 NPT |
| Temperature Range | 32 - 150 DegreeF |
| Outer Diameter | 30.00 in |
| Clutch Heat Sink Capacity | 1460000 ftlb |
| Minimum Engagement Pressure | 10 psi |
| Finish | Black Oxide |
| Clutch Facing Type | High Coefficient |
Single friction disc, self-adjusting clutches mount on driving or driven shafts. They handle transmitted horsepower ratings from fractional up to 25 horsepower with torque ratings to 5000 in-lbs. at 80 psi. These clutches have thermal capacities to 2.5 horsepower and maximum operating speeds up to 3600 rpm. Most are available with integral sheaves, pilot mount or coupling versions. This product group includes twelve imperial models and five metric models.
Additional Information:
Web Tension Controller
Approx. Rs 25,000 / PieceGet Latest Price
Product BrochureProduct Details:| Automation Grade | Manual |
| Voltage | 24V DC |
| Temperature | 32 - 122 DegreeF |
| Open Or Enclosed Design | Enclosed |
| Input Power | 100 - 240 VAC 50/60 Hz |
| Mounting Style | Panel Mount |
| Length | 10.24 in |
| Contact Rating | Auto Trigger (Input), Splice (Input), Tension Error (Output) |
Precise tension control is vital to any web or strip fed operation, the product must be fed under tension, processed under tension and wound up again under tension. Tension controllers are an integral part in maintaining this set tension. Nexen tension controllers range from simple systems with diameter feedback (open loop), to dancer control systems, and the highest precision systems using web tension sensor feedback (closed loop).
Rack Pinion Systems
-
-
-
- +1
Approx. Rs 60,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel (SS) |
| Max Rpm | 1719 |
| Temperature Range | -5 - 40 DegreeC |
| Max Dynamic Torque At Min Life | 385.0 Nm |
| Mounting Style | ISO-9409 Flange Mount |
| Maximum Static Torque | 440.0 Nm |
| Lubrication Free Speed | 0.5 m/s |
| Noise Level | 75 dB |
- RPS Pinions mount to ISO gearbox flanges or smooth output shafts.
- The rollers are bearing supported for very low friction and long life.
- Available in coated or stainless steel.
- RPS Preloaders precisely move the pinion into the rack and establish a small preload.
- RPS Flange Adapters allow flange mount pinions to mount to one reducer frame size larger than they would directly bolt to.
Nexen Ball Screw Brake
-
-
-
- +3
Approx. Rs 30,000 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Size | 4 mm |
| Material | Stainless Steel |
| Weight | 1,3 - 14,7 kg |
| Speed | 10,000 |
| Release Pressure | 5.5 bar |
| Inertia / Coupling | 0,00394 |
| Torsional Rigidity | 6180 - 54772 |
| Minimum Holding Torque | 2 Nm - 125 Nm |
The Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent back driving if a power loss or mechanical defect occurs in the driveline. It provide reliable holding in a compact package. During a power loss the motor has no holding torque allowing the ball screw to back drive and the load to drop. Ball screw brakes connect to the machined end of the ball screw to prevent back driving, load drops and equipment damage during a power loss. Holding force up to 125 Nm (1100 in-lbs.)
Additional Information:
Geared Head Drill Machine
-
-
-
- +1
Approx. Rs 40,000 / PieceGet Latest Price
Product BrochureProduct Details:| Open Or Enclosed Design | Enclosed |
| Bore Size | 9 mm |
| Input Bore Maximum Insertion | 31.0 mm |
| Max Rpm | 7300 |
| Temperature Range | 0 - 40 DegreeC 90 DegreeC Intermittent |
| Input Bolt Circle | 63 mm |
| Input Bolt Hole Size | M4 X 7.0 mm |
| Gear Ratio | 50 |
Harmonic Gearheads offer true zero backlash, high reduction ratios of 50/80/100/120:1, and high load capacity in a very compact package. They utilize the best cross roller bearing technology for the highest rigidity and load capacities. They are available in ISO9409 flange mount or with an integrated RPS pinion. The integrated pinion models offer the ultimate in RPS system performance and simplify installation.
Web Guide Systems
-
-
-
- +1
Approx. Rs 95,000 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Power | 100-240 VAC 50/60 Hz @ 100 Watts |
| Temperature Range | 32 - 122 DegreeF |
| Restrictions | Not For Use With Linear Actuators (Insufficient Current) |
| Outputs | 600 lbs (2669 N) |
| Features | Compact Self-Contained Controller |
| Actuator Stroke | 4 in |
Web guiding systems are necessary to properly align web material being transported through roll-to-roll converting machines. Without web guiding systems and principles a number of factors such as process variations in tension and speed, material property variations in regard to quality, improperly maintained machines, changes in traction and so on, can affect the proper alignment of material.
Additional Information:
Compomac Flexsteel Couplings
Approx. Rs 29,000 / PieceGet Latest Price
Product Details:| Brand | Compomac |
| Bore Style | Straight |
| Max Rpm | 1650 |
| Drive | Pilot Mount |
| Hose Length | 8.25in |
Flexsteel is a zero backlash coupling which uses a disc pack made of stainless steel as a drive element, torsionally stiff, but axially and angulary flexible, to compensate for shafts misalignments.
Nexen Coupling Brakes Clutch
Approx. Rs 40,000 / PieceGet Latest Price
Product Details:| Speed | 10,000 |
| Weight | 1,3-14,7kg |
| Inertia / Couplings | 0.00394 |
| Release Pressure | 5.5bar |
| Torsional Rigidity | 6180-54772 |
Low inertia, high thermal dissipation and self-adjusting facings make Nexen's Friction Brakes ideal for many applications.
Nexen Pneumatic Brake
-
-
-
- +7
Approx. Rs 25,000 / Unit1Get Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Unit1 |
| Brand | Nexen |
| Material | Cast Iron |
| Packaging Type | Box |
| Usage/Application | Industry |
| Applications | packaging |
| Country of Origin | Made in India |
A clutch brake is a circular metal disc with friction material attached to both sides. The purpose of a clutch brake is to stop or slow the input shaft from rotating, allowing the gears to mesh without grinding/clashing.
It is also used to transmit and control power & relative motion between two rotating shafts.
Additional Information:
Web Guide Sensor
-
-
-
- +4
Approx. Rs 5,000 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 1 Piece |
| Input Power | 23 - 30 VDC @ 50 mA |
| Sensor Function | Ultrasonic |
| Sensor Range | 4 - 40 in |
| Cable Length | 72 in |
| Features | Generates A Pulse Per Revolution To Control Tension Based On Roll RPM |
| Weight | 1.1 LB |
Web sensors are the input devices used with tension control systems and web guide systems. web tension sensors include load cells for measuring the force applied to a sensor roller, roll diameter sensors, and rotary sensors used with dancer systems. web guide sensors include both edge and line following sensors.
Additional Information:
Goizper Clutch Brake Combination
-
-
-
- +7
Approx. Rs 19,000 / PieceGet Latest Price
Product BrochureProduct Details:| Bore Size | 1.000 in |
| Bore Style | Straight |
| Maximum Static Clutch Torque | 2800 inlbs |
| Maximum Static Brake Torque | 164 inlbs |
| Temperature Range | 32 - 150 DegreeF |
| Max Rpm | 250 @ 80 psi, 300 @ 70 psi, 350 @ 60 psi, 450 @ 50 psi, 750 @ 40 psi |
| Outer Diameter | 5.73 in |
| Manufactured at | USA |
Clutch brake combination is used where there is frequent start and stop. The clutch is connected to the motor shaft and the brake is connected to the gearbox or output shaft. When the drive is to be transmitted from the motor (driving) to the gearbox or driven, the clutch is engaged. When the drive is to be stopped, the clutch is disengaged and the brake is applied so that the driven shaft comes to an instant stop. At this stage also the motor is still rotating but the drive is not transmitted since the clutch is disengaged. These clutch and brake is designed to have a stationary coil, single surface plate and are used in dry conditions. The unit is robust yet compact and have high torque at low wattage.
Rotary Indexer System
-
-
-
- +4
Approx. Rs 39,998 / PieceGet Latest Price
Product BrochureProduct Details:| Temperature Range | -5 - 40 DegreeC |
| Maximum Output Speed: | 11.7 RPM |
| Max Continuous Output Speed | 8 RPM |
| Input Bolt Hole Size | M6 |
| Input Bolt Circle | 75 mm |
| Input Shaft Diameter | 14 mm |
| Finish | Bare Steel, And Black Oxide |
Two versions are available both based on Nexen’s innovative Roller Pinion technology. The Compact Ring Drive (CRD) system comes complete with a precision grade bearing and drive mechanism in a sealed housing. Three configurations allow the CRD to be optimized for high speed, high torque or both to optimize performance in a small space. The Precision Ring Drive (PRD) consists of a precision grade preloaded cross roller bearing, roller pinion system and precision gearbox offering load capacity capabilities to 1575 kN. The CRD and PRD take rotary positioning to a higher level of performance, providing unmatched positional accuracy, high rigidity and acceleration, low maintenance, and long life.
Rotary Indexer Brake
Approx. Rs 40,000 / PieceGet Latest Price
Product BrochureProduct Details:| Bore Size | 71 mm |
| Temperature Range | 32 - 150 DegreeF |
| Max Rpm | 2000 |
| Maximum Operating Pressure | 6.9 bar |
| Minimum Release Pressure | 4.1 Bar |
| Port Size | 0.250 BSPT |
| Torsional Rigidity | 8,341,193 Nm/Rad |
The I-300 brake is designed for zero backlash holding and emergency stopping, making it ideal for indexers and positioning systems. The spring-engaged, air-released, patented braking element locks and holds the shaft in position without any displacement or reversing of the load. It is flange- or shaft-mounted and has a keyless compression bushing shaft connection for easy installation and IP67-rated when flange-mounted. High torque and short response time ensure the shortest possible stopping distance and precise holding. Brakes can be stacked for additional holding power or redundant braking.
Tension Control Clutches
-
-
-
- +3
Approx. Rs 18,500 / PieceGet Latest Price
Product BrochureProduct Details:| Temperature | 32 - 150 DegreeF |
| Length | 7.39 in |
| Port Size | 0.125 NPT Or 5/32 in. Plastic Tubing |
| Max Rpm | 1800 |
| Operating Range | 1-85 psi |
| Clutch Peak Thermal Input Rate | 32.00 hp Per Caliper |
| Maximum Dynamic Torque | 10400 inlbs |
| Disc Diameter | 20 in |
Rewind operations require smooth, consistent torque to wind roll of all types of materials. Continuous slip applications also need clutches to efficiently dissipate heat. Nexen tension control clutches, with closely held flatness and finish tolerances, combined with specific friction materials provide ultimate web tension control.
Additional Information:
Positioning Stages, Slides And Guides
-
-
-
- +4
Approx. Rs 35,000 / PieceGet Latest Price
Product BrochureProduct Details:| Brand | Nexen |
| Usage/Application | Industrial |
| Country of Origin | Made in India |
| Packaging Type | Box |
| Material | Stainless steel |
| Positioning Accuracy | 20 micron |
Linear and rotary positioning tables, carriages, and slides, both powered and unpowered, including integral bearings and guides.
Nexen Shaft Brakes
-
-
-
- +1
Approx. Rs 25,000 / PieceGet Latest Price
Product BrochureProduct Details:| Dimensions | (20-30)-(40-50) |
| Torque | 200-1200 |
| Weight | 10,000-30,000 |
| Speed | Excess of 300m(980ft) |
| Vibration | Less |
Nexen offers an off-the-shelf, zero-backlash braking solution for shaft-holding applications.
Nexen Gear heads
Approx. Rs 35,000 / PieceGet Latest Price
Product Details:| Max RPM | 7300 |
| Gear Ratio | 50 |
| Input Bolt Hole Size | M4*7.0 mm |
| Design | Enclosed |
| Bore Size | 9 mm |
Nexen’s revolutionary Harmonic Gearhead (HG) is the ideal combination of size and precision
Spiral Compression Springs
-
-
-
- +4
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 5 Piece |
| Style | Coil |
| Shape | Spiral |
| Material | Steel, Aluminum |
| Packaging Type | Box |
Spiral Compression Springs are helical coils designed to resist compressive forces, typically used in various industrial applications. These springs are made from high-quality materials and are known for their durability and ability to absorb shock and maintain structural integrity under pressure. With a wire diameter ranging from 15 to 50mm, they offer flexibility and strength to meet the specific needs of different mechanical systems and machinery. Compression Springs, For Industrial, Wire Diameter: 15 - 50mm
Power Transmission Belt
-
-
-
- +5
Approx. Rs 10,000 / PieceGet Latest Price
Product BrochureProduct Details:| Usage/Application | Industrial |
| Material | Cast Iron |
| Dimension/Size | 40" |
| Country of Origin | Made in India |
| Product Type | Manual |
| Capacity | 2 ton |
Power transmission requires torque and Nexen products provide torque in a wide variety of clutches, brakes, torque limiters and coupling products. Nexen air actuated products are more efficient and economical than electrically actuated products of the same size. Air, unlike electricity, does not generate heat during engagement. Less heat allows greater torque transmission and efficiency. Nexen’s simple designs are easy to use and maintain. When properly applied these products have a long service life making the cost of ownership much less than competitive products.
Siemens Servo Motor
-
-
-
- +9
Approx. Rs 60,000 / PieceGet Latest Price
Product BrochureProduct Details:| Power | 1 KW |
| Temperature Range | 32 - 150 DegreeF |
| Finish | Black Acrylic Paint |
| Max Rpm | 10000 |
| Output Bolt Circle | 75 -92 mm |
| Actuation/Return | Air/Spring |
| Port Size | 0.125 NPT |
The servo motor is a closed-loop mechanism that incorporates positional feedback in order to control the rotational or linear speed and position. The motor is controlled with an electric signal, either analog or digital, which determines the amount of movement which represents the final command position for the shaft.
Additional Information:
Explore More Products
Nayagi Industrial Technologies Private Limited
Bengaluru - 560097, Karnataka, India
© Nayagi Industrial Technologies Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited